USB 2.0-eUSB2 雙路中繼器
| Type | Redriver |
| Function | USB2 |
| USB speed (Mbps) | 480 |
| Number of channels (#) | 2 |
| Supply voltage (Max) (V) | 1.98, 3.6 |
| Supply voltage (Min) (V) | 1.62, 3 |
| Input/ouput voltage (Min) (V) | 0 |
| Input/ouput voltage (Max) (V) | 3.6 |
| Configuration | Dual-channel |
| Features | implementation of USB 2.0 and eUSB2 compliance port Support for Low-speed (LS), Full-speed (FS), High-speed (HS) signals |
| Rating | Catalog |
| Operating temperature range (C) | -20 to 85 |
| ESD HBM (Typ) (kV) | 1.5 |
| Bandwidth (MHz) | 240 |
- Compliance to USB 2.0 and eUSB2 (rev 1.1)
- Support for Low-speed (LS), Full-speed (FS), High-speed (HS)
- Dual repeater with 2:2 crossbar Mux
- Host and device mode (DRD) support
- 4 eUSB2 compensation settings to meet different system requirements
- eUSB2 LS/FS signaling meets 1.2 V option of the eUSB2 interface
TUSB2E22 enables implementation of USB 2.0 compliance port on newer processors using lower voltage processes.
TUSB2E22 is a USB-Compliant eUSB2-USB 2.0 repeater supporting both device and host modes.
TUSB2E22 supports USB Low-speed (LS) and Full-speed (FS) signals and High-speed (HS) signals.
TUSB2E22 is designed to interface with eUSB2 eDSPr or eUSPr operating at 1.2 V single-ended signaling.
TUSB2E22 has 4 levels of compensation settings via EQ0 and EQ1 pins. These settings could be used to optimize compensation for different eUSB2 channel loss profiles.
